Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Technical Assistance Request
Technical Assistance Request
#1
For the last few months, I've been running my computer off of a single hard drive.
Just recently, though, I picked up two more of the same size, and have been wanting to set them up as a RAID array.
Except that, first, the setup prompt for my motherboard's hardware RAID controller doesn't seem to exist anymore (I tried this before, several months ago, when I first built the machine), and second, while the Device Manager shows all three HDs properly, Windows in general only acknowledges the old one, and I have no clue why.
IIUC, it is possible to do a software level RAID, but I don't know how, and Win's being bitchy would seem likely to contraindicate that if not resolved first. Even if I can't get an array up, I'd like to have access to the extra storage, y'know?
Ja, -n

===============================================
"I'm terribly sorry, but I have to kill you quite horribly now."
Reply
Re: Technical Assistance Request
#2
check to make sure you have your onboard raid controller enabled in bios?
sounds like you might have set it to disabled.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)