Quote:Factory-pressed CDs can economically break even with a minimum run as low as 100 to 250 units, depending on the manufacturer. The break-even quantity is determined by your per-unit cost versus sale price, but industry examples indicate that even a run of 100 is feasible for pressed (not CD-R) discs at many modern plants.

Key context and details:

• Replication plants such as Duplication.com and MP Vinyl offer minimum orders of 100 factory-pressed CDs. This means you can get fully professional glass-mastered discs, not just burned CD-Rs, in small runs.
  
• For a run of 250 CDs, manufacturers report a total cost around $1,250 (about $5 per CD); breaking even could occur after selling approximately 120 units at $10 each.
  
• For a run of 100 CDs, if the cost is about $2–$4 per CD depending on packaging and artwork, your break-even point would be reached much sooner—often after selling just 20–40 units at typical indie pricing.
  
• The per-disc price drops significantly at higher runs (e.g., $3.20 at 500 units vs. $5 at 250 units), but the upfront investment is higher.
  
• Latin cuts and boutique manufacturers can produce even fewer (like 10–50), but those are typically not mass-produced glass-mastered discs, and the per-unit price is very high.
  

Practical limitations:

• If you go below 100 units, you'll typically need to use CD-R duplication rather than true CD pressing, which has different durability and perceived value.
  
• True break-even depends on sale price, total costs (including shipping, taxes, and artwork), and actual demand.
  

In summary, 100 pressed CDs is now a realistic minimum for break-even potential, provided you can sell roughly 20–40 units at $10–$15 apiece, making small batch professional releases achievable for independent artists.